Through continuous development and growth of the IT industry in the past few years, 1Y0-A26 exam has become a milestone in the Citrix exam, it can help you to become a IT professional. There are hundreds of online resources to provide the Citrix 1Y0-A26 questions. Why do most people to choose ITCertKing? Because ITCertKing has a huge IT elite team, In order to ensure you accessibility through the Citrix 1Y0-A26 certification exam， they focus on the study of Citrix 1Y0-A26 exam. ITCertKing ensure that the first time you try to obtain certification of Citrix 1Y0-A26 exam. ITCertKing will stand with you, with you through thick and thin.
The IT expert team use their knowledge and experience to make out the latest short-term effective training materials. This training materials is helpful to the candidates. It allows you to achieve the desired results in the short term. Especially those who study while working, you can save a lot of time easily. ITCertKing's training materials are the thing which you most wanted.
We are all ordinary human beings. Something what have learned not completely absorbed, so that wo often forget. When we need to use the knowledge we must learn again. When you see ITCertKing's Citrix 1Y0-A26 exam training materials, you understand that this is you have to be purchased. It allows you to pass the exam effortlessly. You should believe ITCertKing will let you see your better future. Bright hard the hard as long as ITCertKing still, always find hope. No matter how bitter and more difficult, with ITCertKing you will still find the hope of light.
ITCertKing is the leader in the latest Citrix 1Y0-A26 exam certification and exam preparation provider. Our resources are constantly being revised and updated, with a close correlation. If you prepare Citrix 1Y0-A26 certification, you will want to begin your training, so as to guarantee to pass your exam. As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance.
The opportunity always belongs to a person who has the preparation. But, when opportunities arise, will you seize the opportunities successfully? At present, you are preparing for Citrix 1Y0-A26 test. Will you seize ITCertKing to make you achievement? ITCertKing Citrix 1Y0-A26 certification training materials will guarantee your success. With our exam preparation materials, you will save a lot of time and pass your exam effectively. If you choose ITCertKing study guide, you will find the test questions and test answers are certainly different and high-quality, which is the royal road to success. And then, the dumps will help you prepare well enough for 1Y0-A26 exam.
Exam Code: 1Y0-A26
Exam Name: Citrix (Citrix XenServer 6.0 Administration)
One year free update, No help, Full refund!
Total Q&A: 120 Questions and Answers
Last Update: 2014-02-23
1Y0-A26 Free Demo Download: http://www.itcertking.com/1Y0-A26_exam.html
NO.1 An administrator needs to run commands to specify __________ to configure email alerts at the host
level. (Choose the correct option to complete the sentence.)
A. alarm_priority on the host
B. alarm_priority on the virtual machine
C. the sender email address and SMTP server
D. the recipient email address and SMTP server
Answer: D
Citrix 1Y0-A26 1Y0-A26 exam 1Y0-A26 test answers 1Y0-A26 dumps
NO.2 Scenario: An administrator is unable to connect to a resource pool in a XenServer environment in
which high availability is enabled. The administrator discovers that the host is unreachable. What does
the administrator need to do to recover the host?
A. Run the pool-disable command, then the host-shutdown command and then restart the host.
B. Run the pool-disable command, then run the pool-emergency-reset-master command and restart the
host.
C. Run the emergency-ha-disable command, then once the host is restarted, run the pool-ha-enable
command.
D. Run the host-evacuate command, then restart the host and run the pool-emergency-transition-to-
master command.
Answer: C
Citrix 1Y0-A26 1Y0-A26 1Y0-A26 1Y0-A26 certification training
NO.3 When starting up a XenServer from SAN, the BIOS of the ___________ contains the instructions that
enable the host to find the boot disk. (Choose the correct option to complete the sentence.)
A. host machine
B. array controller
C. host bus adapter
D. network interface card
Answer: C
Citrix exam prep 1Y0-A26 exam dumps 1Y0-A26 demo 1Y0-A26 original questions
NO.4 An administrator is setting up the XenServer hosts in an environment to boot from SAN. In which BIOS
would the administrator go to enable XenServer to boot from SAN.?
A. Host
B. Array controller
C. Network interface card
D. Primary host bus adapter
Answer: D
Citrix 1Y0-A26 1Y0-A26 exam prep 1Y0-A26 practice test
NO.5 What must be true in order to integrate Active Directory authentication with a XenServer host?
A. LDAP port 389 is open for inbound traffic to the XenServer host.
B. The Active Directory administrator account is created locally on the XenServer host.
C. The same DNS server is used for both the Active Directory server and the XenServer host.
D. RAS authentication is used for communication between the Active Directory server and the XenServer
host.
Answer: C
Citrix 1Y0-A26 1Y0-A26 1Y0-A26 1Y0-A26 original questions
NO.6 An administrator was given new security rules and now needs to remove specific permissions from the
users in the VM Admin Role Based Access Control group. How can the administrator remove the specific
permissions from the VM Admin user group?
A. Reset the VM Admin user group back to the default permissions.
B. Delete the registry key that applies to the specific permissions that need to be removed.
C. Run the xe subject-role-remove uuid=<subject UUID> role-name=vm.pool_migrate XenServer
command.
D. Remove the specific permissions from the Active Directory user group associated with the VM Admin
user group.
Answer: C
Citrix 1Y0-A26 1Y0-A26 certification training 1Y0-A26 1Y0-A26 test questions 1Y0-A26 study guide
NO.7 Scenario: An administrator is moving a XenServer host from the New York datacenter to the London
datacenter. During the installation of XenServer, the default NTP settings were selected. How must the
administrator ensure that the XenServer host has the correct time settings?
A. Configure the time in the host BIOS.
B. Configure the time zone in the ntp.conf file.
C. Change the time zone using the xsconsole.
D. Change the NTP servers to the London NTP servers.
Answer: C
Citrix 1Y0-A26 questions 1Y0-A26 certification 1Y0-A26 exam dumps 1Y0-A26
NO.8 Scenario: An administrator is planning to introduce 100 new virtual machines into the environment.
The administrator plans to use XenServer templates and duplication mechanisms. What must the
administrator consider when deciding between the full copy and fast clone duplication mechanisms?
A. A template needs to be copied before it can be fast cloned.
B. A virtual machine that is duplicated using the full copy method may impact disk performance.
C. A virtual machine that is duplicated using the fast cloned method may impact disk performance.
D. A template created on local storage can be duplicated by using the full copy method by any host in the
pool.
Answer: C
Citrix certification training 1Y0-A26 1Y0-A26 practice test 1Y0-A26 dumps
NO.9 Scenario: An administrator notices a duplex mismatch on the network interface card (NIC) which is
configured as the management interface. The administrator realizes that the switch was set to 100 full,
but XenServer auto-configured the NIC to 100 half, autoneg=on. How can the administrator ensure the
XenServer host does NOT auto-configure the NIC in the future?
A. Change the NIC properties in the xsconsole.
B. Use the xe pif-configure-ip command to disable auto-configuration.
C. Use the xe pif-param-set command to set other-config:ethtool-autoneg=off.
D. Assign a new NIC to the management interface within the XenCenter Network tab.
Answer: C
Citrix 1Y0-A26 original questions 1Y0-A26 1Y0-A26 answers real questions
NO.10 An administrator cloned a template into a virtual machine and then converted it back into a template.
Which action must be performed on the disks to restore expected levels of disk performance?
A. Run SysPrep
B. Complete a full copy
C. Execute a fast clone
D. Suspend before cloning
Answer: B
Citrix 1Y0-A26 exam simulations 1Y0-A26
NO.11 An administrator is planning to apply an update that has already been downloaded to a XenServer host
in production. What is the next step that the administrator needs to take in the update process?
A. Restart the host.
B. Generate the UUID for the patch.
C. Specify the UUIDs of the host and the patch.
D. Shut down, suspend or migrate the virtual machines running on the host.
Answer: D
Citrix exam dumps 1Y0-A26 test questions 1Y0-A26
NO.12 An administrator needs to authenticate all users when they log into the XenServer pool using their
Windows credentials. What is the first step the administrator must take to achieve this?
A. Join the XenServer pool to the domain.
B. Add each user to the Users tab in XenCenter.
C. Create a XenServer user group within Active Directory.
D. Create Active Directory accounts for the XenServer users.
Answer: A
Citrix 1Y0-A26 1Y0-A26 test answers 1Y0-A26 demo 1Y0-A26
NO.13 An administrator needs to export a virtual machine to an NFS share mounted on a XenServer host.
Which xe CLI command does the administrator need to execute from a remote machine to perform the
virtual machine export?
A. xe vm-export -h <hostname> filename=<pathname_of_file>
B. xe vm-export -h <hostname> -u <root> -pw <password> vm=<vm_name>
C. xe vm-export -h <hostname> -u <root> -pw <password> filename=<pathname_of_file>
D. xe vm-export -h <hostname> -u <root> -pw <password> vm=<vm_name>
filename=<pathname_of_file>
Answer: D
Citrix exam 1Y0-A26 study guide 1Y0-A26 1Y0-A26 1Y0-A26
NO.14 Scenario: An administrator is adding a new host to a XenServer resource pool. XenServer is already
installed on the host, but the NTP server settings are configured incorrectly on the host. Which file can the
administrator edit to adjust the NTP server settings on the new XenServer host?
A. /etc/ntp.conf
B. /etc/ntp/keys
C. /etc/init.d/ntpd
D. /etc/ntp/step-tickers
Answer: A
Citrix exam 1Y0-A26 1Y0-A26 1Y0-A26 exam prep
NO.15 Scenario: An administrator configured XenServer Role Based Access Control (RBAC) to authenticate
using Active Directory. Using RBAC, the administrator must grant Level 2 Support users with permission
to start and stop virtual machines. Which two steps must the administrator take to grant Level 2 Support
users virtual machine permissions? (Choose two.)
A. Assign a role to the subject.
B. Add an Active Directory group to the pool.
C. Assign XenServer permissions to a group.
D. Add users and their roles to the authorized list of users.
Answer: AB
Citrix original questions 1Y0-A26 demo 1Y0-A26 exam simulations 1Y0-A26
NO.16 Scenario: An administrator needs to upgrade the memory of a XenServer host. Business requirements
state that this task can only be done during business hours. Which two steps must the administrator take
before shutting down a XenServer host in an environment that has high availability enabled without
affecting performance? (Choose two.)
A. Disable the host.
B. Evacuate the host.
C. Reset the pool master.
D. Disable high availability.
Answer: AB
Citrix 1Y0-A26 test 1Y0-A26 certification training
NO.17 Scenario: In an environment with high availability enabled, an administrator discovered that a host is
unreachable in a XenServer pool. The administrator disabled high availability in order to make the host
reachable. Which xe CLI command can the administrator run to make the host reachable again?
A. host-disable
B. host-evacuate
C. pool-designate-new-master
D. pool-emergency-reset-master
Answer: D
Citrix 1Y0-A26 1Y0-A26 1Y0-A26 exam simulations
NO.18 Scenario: An administrator is planning to upgrade the RAM in a XenServer host. Due to business
restrictions, the host must be shut down during normal business hours. High availability is enabled in the
XenServer resource pool. Which step does the administrator need to take before shutting down the
XenServer host to allow the virtual machines to run after the host is shut down?
A. Disable high availability.
B. Export the virtual machines.
C. Place the host in maintenance mode.
D. Copy the virtual machines to another host.
Answer: C
Citrix study guide 1Y0-A26 1Y0-A26 braindump 1Y0-A26
NO.19 An administrator needs to apply an update to a XenServer pool, but needs to control the update path
and the virtual machine migration. What does the administrator need to do to achieve this?
A. Update all hosts in the pool using the xe CLI.
B. Use the Install Update wizard to update the pool.
C. Update each host individually starting with the pool master.
D. Select manual update mode when updating the pool in XenCenter.
Answer: C
Citrix 1Y0-A26 answers real questions 1Y0-A26 test 1Y0-A26 questions
NO.20 Scenario: To improve performance and increase security, a network team will be moving all XenServer
hosts into a more secure, and high resiliency subnet. The administrator must now change the subnet
mask on all XenServer hosts to match the new network: 172.16.0.0/16. Which command will the
administrator need to execute on each host?
A. xe pif-reconfigure-ip uuid= mode=dhcp netmask=255.255.0.0
B. xe pif-reconfigure-ip uuid= mode=static netmask=255.255.0.0
C. xe pif-reconfigure-ip uuid= mode=dhcp netmask=172.16.0.0/16
D. xe pif-reconfigure-ip uuid= mode=static netmask=172.16.0.0/16
Answer: B
Citrix 1Y0-A26 1Y0-A26 exam dumps 1Y0-A26 certification training 1Y0-A26 certification training
ITCertKing offer the latest 646-206 exam material and high-quality HP2-B25 pdf questions & answers. Our C_HANATEC_1 VCE testing engine and 1z0-460 study guide can help you pass the real exam. High-quality CUR-009 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/1Y0-A26_exam.html
没有评论:
发表评论